Hey Guys How are you? SO I hope you will be fine. So today we are going to provide here all Toshiba TV Service Menu Codes. Here are available all useful codes that can be used for your Toshiba LCD, LED, CRT, and Smart Android TV.
The Service Menu or the Factory Menu is a secret mode in Toshiba LCD/LED TVs. We use this menu to change any advanced settings in LCD/LED TV. Sometimes technicians use this menu to access the advanced information about the TV set and the Firmware.
Before you open the Menu using the Toshiba LED or Smart TV Service Menu Code, if you are a beginner technician or a normal user and you want to change any of your required settings in your Toshiba LCD/LED TV set then you must need knowledge of this. And if you do any operation without knowledge, we are not responsible for any loss/damage.
- Electronics Courses, eBooks
- LCD LED TV Repair eBooks
- All LCD LED TV Firmware
- All CRT TV Firmware
- All LCD Monitor Firmware
- All Laptop Bios Bin Files
- All Laptop Schematic PDF
- Satellite Receiver Software
- All Programmer Software
- PC Schematic Diagrams
- All T-CON Board Firmware
- T-CON Schematic Diagram
- TV Schematics/Circuit PDF
- TV Service Menu Codes
- COF IC Datasheets Collection
- Inverter IC Protection Remove
- Voltage Charts and Details
- How to Update Firmware?
- Helpful Datasheets & Pinouts
- Helpful Guides and Material
Toshiba TV Service Menu Codes
Below are some easy and useful ways described. You can use the best method for your TV if the first does not work, you can try others one by one.
1: Turn Your TV On and Press the Mute button 3 times on the Remote
2: After that, Again Press the Mute button and Hold at the same time press the TV keypad
3: Now, Release both buttons
4: The S letter should appear on the upper right of the screen
5: Press the MENU button on the TV’s front panel again.
6: The Service Mode will be opened, Turn off the TV to exit the Menu
1: First, Press and Hold the Mute button on the remote
2: Now, Press the Menu button on the TV keys
3: Menu should be displayed and Tap exit to exit the Menu
1: With the TV Turn On Press the Mute button two times on the Remote
2: Then Press and Hold the Mute button on the Remote and Press Menu on TV keys
3: Now, Release them and the S letter should be shown on the upper right of the screen
4: Press the MENU button on the TV’s front panel again.
5: The Service Mode will be opened, Turn off the TV to exit the Menu
1: Press and hold the VOL- button on the TV
2: And the 9 button on the remote control for a few seconds
3: You power off the TV to exit this Menu
To Get More TV Service Menu Codes You can Visit Ptechnicians.com